Standard memory 8 MB Flash; 32 MB SDRAM

Routing switching capacity 13.6 Gbps
Throughput maximum 10.1 mpps

External IO ports
48 10/100 ports; 1 RS-232C DB-9 console ports; 2 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers)

Input operating current 6.4 A

Mounting Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only

Product weight fully loaded (imperial) 16.31 lb

Performance:

13.6 Gbps (ProCurve 2650 and 2650-PWR)/9.6 Gbps (ProCurve 2626, 2626-PWR, 2600-8-PWR) backplane: wire-speed non-blocking architecture for low-latency throughput

Connectivity:

Dual-personality functionality: two 10/100/1000 ports or mini-GBIC slots for optional fiber connectivity such as Gigabit-SX, -LX, or -LH

Power over Ethernet (IEEE 802.3af) compliant (ProCurve 2650-PWR/ ProCurve 2626-PWR/ ProCurve 2600-8-PWR): provides up to 15.4 W per port for IP phones, wireless access points, Web cameras, and more (ProCurve 2650-PWR may require an external power supply to provide full 15.4 W for all 48 ports)

Resiliency and high availability:

IEEE 802.3ad Link Aggregation Control Protocol (LACP) and ProCurve trunking: support up to 6 trunks, each with up to 4 links (ports) per trunk; trunking across modules is supported

Spanning Tree Protocol (IEEE 802.1D): provides redundant links while preventing network loops

IEEE 802.1w Rapid Convergence Spanning Tree Protocol: increases network uptime through faster recovery from failed links

IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees

Optional external redundant power supply (ProCurve 2650-PWR, ProCurve 2626-PWR, ProCurve 2600-8-PWR): provides uninterrupted power; sold as an accessory