Cisco Switch PN WS-C4506E-S6L-1300

Original price was: $21,995.00.Current price is: $10,066.00.

Cisco Switch PN: WS-C4506E-S6L-1300

The Cisco Catalyst 4500 Supervisor Engine 6L-E is a next-generation, Layer 3 supervisor addition to the Cisco Catalyst 4500 E-Series product line.

Product Description

Cisco Switch PN WS-C4506E-S6L-1300

The Cisco Catalyst 4500 Supervisor Engine 6L-E is a next-generation, Layer 3 supervisor addition to the Cisco Catalyst 4500 E-Series product line. The Supervisor 6L-E now supports full routing protocols, Open Shortest Path First (OSPF), Enhanced IGRP (EIGRP), Border Gateway Protocol (BGP), and many other advanced features with the Enterprise Services package. (Note: You must use Cisco IOS Software Release 12.2(53)SG2 or later for Enterprise Services support).

Important Information

We are not only looking to sell you only one time we look to build long business relation with you.

Warranty & Support

We offer manufacture warranty plus our ICT warranty.

If you need any technical assistant, our expert technicians are always available to help you without any additional cost.

Contact us now and let our team help you.

Management features
Switch layerL3+
Quality of Service (QoS) supportYes
Switch typeManaged
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity96
SFP/SFP+ slots quantity4
Ethernet LAN (RJ-45) ports96
Networking
IGMP snoopingYes
Broadcast storm controlYes
DHCP clientYes
DHCP serverYes
10G support-
Data transmission
Supported data transfer rates10/100/1000 Mbps
Switching capacity-
MAC address table55000  entries
Number of VLANs-
Maximum data transfer rate-
Security
Security algorithms802.1x RADIUS, SSH
Access Control List (ACL)Yes
Protocols
Management protocolsSNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SSH, SSH-2
Supported network protocolsRIP-1, RIP-2, EIGRP, MLDv2, MLD
Design
Rack mountingYes
Colour of productBlack
Form factor10U
LED indicatorsYes
SafetyUL 60950, CAN/CSA-C22.2 No. 60950, EN 60950, IEC 60950, TS 001, AS/NZS 3260
CertificationNEBS l3, CE, FCC A, EN 60950, EN 61000-3-2, EN55022, VCCI A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 A, UL 60950, EN50082-1, CSA 22.2 No. 60950, EN 61000-6-1, ACA TS001, AS/NZS 3260, FCC Part 68, AS/NZ 3548 Class A, JATE, ICES-003 A, CS-03, FCC CFR47 15, EN300-386
Performance
StackableYes
Internal memory512  MB
Mean time between failures (MTBF)710119  h
Power
Power consumption (typical)1300  W
Power over Ethernet (PoE)
Power over Ethernet (PoE) supportYes
Operational conditions
Operating temperature (T-T)0 - 40  °C
Storage temperature (T-T)-40 - 75  °C
Operating relative humidity (H-H)10 - 90  %
Operating altitude-60 - 2000  m
Weight & dimensions
Weight18370  g
Other features
Dimensions (WxDxH)441.3 x 439.7 x 317  mm
Expansion slots6
Bandwidth48  Gbit/s
Power LEDYes
Technical featuresIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s

Cisco Catalyst 4500 Supervisor Engine 6L-E Feature Highlights
– Centralized 280-Gbps switching capacity with 225 millions of packets per second (Mpps) of throughput
– IP routing protocols: EIGRP, OSPF, Routing Information Protocol (RIP), and RIPv2
– BGP Version 4 (BGPv4) and Multicast Border Gateway Protocol (MBGP)
– Virtual Route Forwarding-Lite (VRF-Lite)
– IPv6 support in hardware, providing line-rate forwarding for IPv6 packets

? 2013 Cisco and/or its affiliates. All rights reserved.. You can mix and match classic line cards and E-Series line
cards within a Cisco Catalyst 4500 E-Series chassis with no performance degradation. When you deploy the
Cisco Catalyst Supervisor Engine 6L-E with classic line cards, all of the new features except the 24-Gbps per-slot
switching capacity are inherited. The Cisco Catalyst 4500 Supervisor Engine 6L-E is also compatible with classic
Cisco Catalyst 4500 line cards, chassis (3-, 6-, and 7-slot), and power supplies, providing full investment
protection.
The Cisco Catalyst Supervisor Engine 6L-E also provides flexibility and an easy migration path to 10 Gigabit
Ethernet uplinks with dual-purpose X2 slots that can accommodate wire-speed 10 Gigabit Ethernet optics or Cisco
TwinGig Converter Modules, enabling Gigabit Ethernet SFP optics.

The capabilities and investment protection provided by the Supervisor Engine 6L-E facilitate not only adequate
scalability for today’s network access requirements but also investment protection of your network components by
providing significant software functions for future deployments
– Flexibility to operate at 6 or 24 Gbps per line-card slot
– Ability to mix and match 6-Gbps classic and 24-Gbps E-Series line cards with no performance degradation
– Dual 10 Gigabit Ethernet uplinks (X2 optics)
– Cisco TwinGig Converter Modules that enable flexibility for up to four Gigabit Ethernet (Small Form-Factor
Pluggable [SFP]) uplinks in the X2 optic slots
– Low latency
– Hardware forwarding entries: 57,000
– Dynamic hardware forwarding table allocations for ease of IPv4-to-IPv6 migration
– Quality-of-service (QoS) services hardware entries: 16,000 per direction
– Advanced QoS support with up to eight queues per port, dynamic queue sizing, and hierarchical policing to
provide flexibility and control
– Security services entries: 16,000 per direction
– Support for the following software packages: LAN Base, IP Base, and Enterprise Services (Enterprise
Services support introduced with Cisco IOS Software Release 12.2(53)SG2)