Call for pricing
HP 6400 cl Series consists of 6-port 10-GbE stackables with optional 10-GbE add-on modules.
HP 6400 cl Series consists of 6-port 10-GbE stackables with optional 10-GbE add-on modules.
Loaded with full Layer 3 features, the 6400cl series switches offer low-cost 10-GbE for high-performance aggregation of clusters of Gigabit switches.
Ideal for consolidating multiple wiring closets, the HP E6400 cl Series also provides fiber flexibility to connect remote campuses up to 40 km away.
We are not only looking to sell you only one time we look to build long business relation with you.
We offer manufacture warranty plus our ICT warranty.
If you need any technical assistant, our expert technicians are always available to help you without any additional cost.
Contact us now and let our team help you.
Ports
6 open 10-GbE X2 transceiver slots
Supports a maximum of 8 10-GbE ports, with optional module
Physical characteristics
Dimensions 16.9(d) x 17.4(w) x 1.7(h) in. (42.93 x 44.2 x 4.32 cm) (1U height)
Weight 13.56 lb. (6.15 kg)
Memory and processor
Processor Motorola PowerPC MPC8245 @ 266 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 4 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
Latency < 11.7 ?s (LIFO 64-byte packets)
Throughput up to 119 million pps (64-byte packets)
Routing/Switching capacity 160 Gbps
MAC address table size 16000 entries
Environment
Operating temperature 32?F to 131?F (0?C to 55?C); 104?F (40?C) when used with SR/LR/ER optics
Operating relative humidity 15% to 95% @ 104?F (40?C), noncondensing
Nonoperating/Storage temperature -40?F to 158?F (-40?C to 70?C)
Nonoperating/Storage relative humidity 15% to 95% @ 149?F (65?C), noncondensing
Altitude up to 15,000 ft. (4.6 km)
Acoustic Power: 55 dB; DIN 45635T.19 per ISO 7779 @ < 77?F (25?C)
Electrical characteristics
Maximum heat dissipation 383 BTU/hr (404 kJ/hr), including use of optional cl modules with optics
Voltage 100-127/200-240 VAC
Current 3/1.5 A
Maximum power rating 120 W
Frequency 50/60 Hz
Notes Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Safety
CSA 22.2 No. 60950EN 60950/IEC 60950UL 60950
Quality of Service (QoS)
Rate limiting ? per-port ingress enforced maximums
Layer 4 prioritization ? enables prioritization based on TCP/UDP ports
Traffic prioritization (IEEE 802.1p) ? allows real-time traffic classification into eight priority levels mapped to eight queues
Class of Service (CoS) ? sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
Performance
160 Gbps backplane with 119 mpps ? unprecedented bandwidth for low-latency throughput
Selectable queuing configurations ? increase performance by selecting the queuing configuration that best meets the requirements of network applications
Jumbo frames ? on Gigabit and 10-Gigabit ports, allow high-performance remote backup and disaster-recovery services
Manageability
sFlow (RFC 3176) ? wire-speed traffic accounting and monitoring
RMON and XRMON ? provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Stacking capability ? single IP address management for a virtual stack of up to 16 switches