Address table size 100,000 entries

Management features ProCurve Manager Plus; ProCurve Manager (Included); Command line interface

Latency <25 ?s (FIFO 64-byte packets)

Memory and processor
Fabric module: PowerPC IBM405 @ 266 MHz, 16 MB flash, 16 MB SRAM, 256 MB SDRAM; Interface module: PowerPC IBM405 @ 266 MHz, 16 MB flash, 256 MB SDRAM; packet buffer size: 128 MB RL-DRAM per module; Management module: PowerPC MPC7410 @ 400 MHz, 16 MB flash, 1 GB SDRAM, 512 MB compact flash

Performance
Routing/switching capacity 320 Gbps
Throughput up to 238 million pps

Ports
External I/O ports 16 open module slots; Supports a maximum of 32 10-GbE ports or 160 100/1000 ports or 160 mini-GBICs, or a combination

Power
Power availability 30/15 A
Power consumption 3000 W
Heat dissipation 10,238 BTU/hr
Power requirements 100-125 VAC/200-240 VAC; 50/60 Hz

Rack
Rack mounting Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only. Requires 2 or more persons or lift-jack assistance.

Environmental information
Operating temperature range 5? to 40? C
Operating altitude 4,570 m

Physical information
Weight 154.22 kg
Dimensions (W x D x H) 43.94 x 54.61 x 88.39 cm

High Availability – Optional Redundancy

High Availability – Optional Redundancy: Redundant power supply provides uninterrupted power

Spanning Tree Protocol (IEEE 802.1D)

Spanning Tree Protocol (IEEE 802.1D): provides redundant links while preventing network loops

Automatic routing switch failover

Automatic routing switch failover: provides hot standby redundancy using standards-based VRRP (Virtual Router Redundancy Protocol)

Port trunking

Port trunking: for higher switch-to-switch throughput and link-level redundancy, with support for standards-based link aggregation (IEEE 802.3ad); support up to 80 trunks, each with up to 8 links (ports) per trunk; trunking across modules is supported

Hot-swappable modules

Hot-swappable modules: permit modules and mini-GBICs to be added or swapped without interrupting the network

Standards based IP routing

Standards based IP routing: provides routing of IP at media speed; supports static routes, RIP, RIPv2, and OSPF with ECMP

100K IP address routing table

100K IP address routing table: enables large network deployments

Traffic prioritisation based on 802.1p and Diffserv (TOS)

Traffic prioritisation based on 802.1p and Diffserv (TOS): allows real-time traffic classification into 11 traffic classes mapped to 5 queues and up to 3 levels of RED drop precedence, providing rich Quality of Service capabilities

Class of Service (CoS)

Class of Service (CoS): update egress 802.1p or IP DSCP based on ingress port 802.1p, IP Diffserv, or policy